10 Gallon Battery Foam Unit with Polypropylene Trigger Handle

FI-10N-B
Share | How to Buy
  • Draws from pre-mixed solution
  • Battery operated
  • Up to 45 minutes of continuous use from one charge
  • Trigger gun handle with foam fan tip
  • Hinged back plate provides tool-free access to components
  • Natural color tank for easy visibility of product levels
  • Hinged lid, available in 5 colors
  • Integrated hose wraps
  • Front-facing drain
Liquid temperature range40-100˚F (4.4-37˚C)
Electrical requirements120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only
Operating voltage12 VDC
Chemical compatibilityChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Power typeBattery
Battery charge time (from full depletion)8 hours
Battery run time (from full charge)45 minutes of continuous use
Chemical pickup typeDraws from pre-mixed solution
Number of products unit can draw from (and whether it draws simultaneously or one at a time)One product
Suction line length/diameter3/8 in. (9.5 mm) inside diameter)
Capacity12.5 gallons (47.32 liters)
Discharge hose diameter/length12 ft. (3.66 m) hose, with 3/8 in. (9.5 mm) inside diameter
Discharge wand/tip typePolypropylene trigger handle with 50˚ fan tip
Output distance5-6 ft. (1.52-1.83 m)
Output volume4-5 gal/min (15-18.93 l/min) of foam
Flow rate*2 gal/min (7.6 l/min)
Pump sealsSantoprene, Viton, or Kalrez
Wheel typeTwo 10 inch non-marking wheels

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What's in the box?

  • Complete foam unit with discharge hose and wand
  • Battery charger
  • User manual

Options

 Pump Seal Material 
FI-10NSantroprene (standard)-B
Viton (V)
Kalrez (K)

Add bold option codes to item number as shown. For standard options, no option code is needed. Examples:

  • FI-10N-B (standard unit with Santoprene pump seals)
  • FI-10NV-B (unit with Viton pump seals)

Pump Seal Material Compatibility

Need help with sales or support?

Phone

616.656.9225