15 Gallon Battery Foam Unit

FI-BP-15N
Share | How to Buy
  • Draws from pre-mixed solution
  • Battery-powered – no air lines or power cords to hold you back
  • Up to 2 hours of non-continuous run time from one charge
  • Easy-to-read battery level indicator on back plate
  • Designed for easy charging and maintenance
  • Ideal for drain foaming, spot cleaning, and more
  • Optimized for use with low-foaming chemical products
  • Produces a lower volume of foam than our air-operated units
  • Natural color tank for easy visibility of product levels
  • Hinged lid, available in 5 colors
  • Integrated hose wraps
  • In-line strainer to protect pump from debris
Liquid temperature range40-100˚F (4.4-37˚C)
Electrical requirements120 VAC at 60 Hz, 2 amps (GFCI protected outlet) for battery charger only
Operating voltage12 VDC
Chemical compatibilityChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Power typeBattery
Battery charge time (from full depletion)7.5 hours
Battery run time (from full charge)Up to 2 hours of non-continuous run time
Chemical pickup typeDraws from pre-mixed solution
Number of products unit can draw fromOne product
Suction line length/diameter3/8 in. (9.5 mm) inside diameter
Capacity15 gallons (56.78 liters)
Discharge hose diameter/length15 ft. (4.6 m) hose, with 1/2 in. (12.7 mm) inside diameter)
Discharge wand/tip typeStainless steel wand with 65 fan tip and ball valve
Output distance5-6 ft. (1.52-1.83 m)
Output volume4-5 gal/min (15-18.93 l/min) of foam
Flow rate*2 gal/min (7.6 l/min)
Pump sealsSantoprene, Viton, or Kalrez
Wheel typeTwo 10 inch non-marking wheels

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What's in the box?

  • Complete foam unit with discharge hose and wand
  • Battery (packaged separately - installation instructions included)
  • Battery charger
  • User manual

Options

 Pump Seal Material
FI-BP-15NSantoprene (standard)
Viton (V)
Kalrez (K)

Add bold option codes to item number as shown. For standard options, no option code is needed. Examples:

  • FI-BP-15N (standard unit with Santoprene pump seals)
  • FI-BP-15NV (unit with Viton pump seals)

Pump Seal Material Compatibility

Need help with sales or support?

Phone

616.656.9225