• Get A Quote

20 Gallon Gel Unit

#GI-20N

Features

  • Draws from pre-mixed solution
  • Powered by compressed air
  • Hinged back plate provides tool-free access to components
  • Quick-change pump
  • Natural color tank for easy visibility of product levels
  • Hinged lid
  • Color coding options:
    • Lid – 7 colors (BK, BL, GN, YL, RD, PL, OR)
    • Discharge hose – 4 colors (BL, GN, YL, RD)
  • Integrated hose wraps
  • In-line strainer to protect pump from debris
  • Front-facing drain
  • Fan tip wand assembly for increased coverage
  • Anti-kink hose protection

Datasheet

20 Gallon Gel Unit

User Manual

20 Gallon Gel Unit

POWER TYPE

Compressed air

CHEMICAL PICKUP TYPE

Draws from pre-mixed solution

NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME)

One product

SUCTION LINE LENGTH/DIAMETER

3/8 in. (9.5 mm) inside diameter

CAPACITY

20 gallons (75.71 liters)

DISCHARGE HOSE DIAMETER/LENGTH

30 ft. (9 m) hose, with 1/2 in. (12.7 mm) inside diameter

DISCHARGE WAND/TIP TYPE

10 in. (50.8 cm) poly wand with fan tip and ball valve (Spray tips included: ST1510, ST2508, and ST4008)

OUTPUT DISTANCE

6-10 ft. (1.8-3 m) (Varies due to viscosity of product)

OUTPUT VOLUME

0.5-1 gal/min (1.89-3.79 l/min) (Varies due to viscosity of product and fan tip size)

FLOW RATE*

2 gal/min (7.6 l/min) (Varies based on spray tip used)

PUMP SEALS

Santoprene, Viton, or Kalrez

WHEEL TYPE

Two 10 inch non-marking

COMPRESSED AIR REQUIREMENTS

40-80 psi (3-5 bar) with 2 cfm (28.3 l/min)

LIQUID TEMPERATURE RANGE

40-100˚F (4.4-37˚C)

CHEMICAL COMPATIBILITY

Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

Options
PUMP SEAL OPTIONS
GI-20N Santoprene (standard)
Viton (V)
Kalrez (K)

 

Add option codes to item number as shown.  For standard options, no option code is needed.  Examples:

  • GI-20N (standard unit with Santoprene pump seals)
  • GI-20NV (unit with Viton pump seals)

Other available options:

  • Color coding – lid +/or discharge hose
  • Complete gel unit with discharge hose and wand
  • Extra spray tips with different flow rates and fan patterns
  • User Manual

FAQs

Which pump seal material should I choose?

Pump Seal Material Compatibility

Choose a pump seal material that is compatible with the chemicals you will use. Chemical incompatibility can cause accelerated wear and equipment failure that is not covered by warranty, so it’s important to do your research.

  • Consult the safety data sheet (SDS) for your chemical to learn about the ingredients.
  • Use a chemical compatibility database (like this one: https://www.coleparmer.com/Chemical-Resistance) to look up the ingredients and find material compatibility info.
  • Note that the concentration of chemicals makes a big difference in compatibility. Think about whether the chemical you use will be in a pre-diluted or concentrated form when it is used in the equipment.
  • If you need help, ask your chemical manufacturer. Or, send your SDS to techsupport@foamit.com and we can help.

Accessories

Support Videos

How to add air/water separator (WS-20CFM-A) for portable family units

FI-10N, FI-5N, FI-20N, FI-25N, FI-30N, FI-50N, FI-10N-SM, FI-20N-SM, FI-25N-SM, FI-30N-SM, FI-50N-SM, FI-5N-SM, SP-10N, SP-20N, SP-25N, SP-30N, SP-5N, SP-50N, GI-10N, GI-20N, GI-25N, GI-30N, GI-5N, FG-10N-2, FG-10N-3-TM

Changing Cap and/or Flange

FG-10N-2-TM, FG-10N-3-TM, FI-20N, GI-10N, SP-10N

How to change a pump - with quick-change pump bracket

How to replace a hose or wand

Wondering How to Buy?

We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.

Improvce Your Experience

You’re using a web browser we don’t support. Try one of these options to have a better experience.