30 Gallon Gel Unit with Agitator

GI-30N-AM
Share | How to Buy
  • Draws from pre-mixed solution
  • Powered by compressed air
  • Air operated agitator to continually mix product in tank
  • Hinged back plate provides tool-free access to components
  • Quick-change pump
  • Natural color tank for easy visibility of product levels
  • Hinged lid, available in 5 colors
  • Integrated hose wraps
  • In-line strainer to protect pump from debris
  • Front-facing drain
  • Fan tip wand assembly for increased coverage
  • Anti-kink hose protection
Compressed air requirements40-80 psi (3-5 bar) with 15-18 cfm (425-510 l/min)
Liquid temperature range40-100˚F (4.4-37˚C)
Chemical compatibilityChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Power typeCompressed air
Chemical pickup typeDraws from pre-mixed solution
Number of products unit can draw from (and whether it draws simultaneously or one at a time)One product
Suction line length/diameter3/8 in. (9.5 mm) inside diameter
Capacity30 gallons (113.56 liters)
Discharge hose diameter/length30 ft. (9 m) hose, with 1/2 in. (12.7 mm) inside diameter
Discharge wand/tip type24 in. (60.9 cm) stainless steel wand with fan tip and ball valve (Fan tips included: ST2520SS, ST1510, ST2508, and ST4008SS)
Output distance6-10 ft. (1.8-3 m) (Varies due to viscosity of product)
Output volume0.5-1 gal/min (1.89-3.79 l/min) (Varies due to viscosity of product and fan tip size)
Flow rate*2 gal/min (7.6 l/min) (Varies based on fan tip used)
Pump sealsSantoprene, Viton, or Kalrez
Wheel typeTwo 10 inch non-marking, two 5 inch casters with lock

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What's in the box?

  • Complete gel unit with discharge hose and wand
  • Extra spray tips with different flow rates and fan patterns
  • User Manual

Options

 Pump Seal Options 
GI-30NSantoprene (standard)-AM
Viton (V)
Kalrez (K)

Add bold option codes to item number as shown.  For standard options, no option code is needed.  Examples:

  • GI-30N-AM (standard unit with Santoprene pump seals)
  • GI-30NV-AM (unit with Viton pump seals)

Pump Seal Material Compatibility

Need help with sales or support?

Phone

616.656.9225