EZBlend Chemical Transfer Unit

CTX2V-EZB
Share | How to Buy
  • Designed specifically for use with Sterilex products – part of the Sterilex EZBlend System >>
  • Transfer Sterilex from drums to EZBlend Foam Unit without drum pumps
  • User-friendly color coding corresponds to Sterilex solution 1 and 2
  • Transfer each product at up to 3.5 gal/min (13.2 l/min)
  • Viton pump seals for compatibility with Sterilex
  • Tool-free pump changes with our quick-change pump bracket
  • Chemically-resistant hybrid thermoplastic (TPE) hose
  • Weighted suction line with filter and check valve
  • Air regulator with filter
  • Strain relief on the discharge hose
  • Activation by trigger gun
  • Air-operated diaphragm pump with quick-release hose barbs
Compressed air requirements20-80 psi (1.4-5 bar) with 2 cfm (56 l/min)
Liquid temperature range40-100˚F (4.4-37˚C)
Chemical compatibilityThis unit is specifically configured for use with Sterilex liquid products.
Power typeCompressed air
Chemical pickup typeDraws from concentrated product
Number of products unit can draw fromOne product per pump, individually or simultaneously
Suction line length/diameter8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter
Discharge line length/diameter8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter
Discharge wand/tip typePolypropylene trigger handle
Flow rate*3.5 gal/min (13.2 l/min) per pump
Pump sealsViton

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What's in the box?

  • Complete unit with discharge hoses and suction lines
  • Mounting hardware for plate
  • User manual

Options

No options available.

Need help with sales or support?

Phone

616.656.9225