Mixing Station for 2-Part Products

MS-2P
Share | How to Buy

Resources

User Manual

(pdf, 305 KB)

Datasheet

(pdf, 412 KB)
A FILL-iT product.
  • Draws from concentrate
  • Water driven
  • Dual product injector accurately mixes 2-part products 
  • Ideal for use with 2-part drain cleaning products
  • Safely fill jug, foam unit, spray unit, or equipment tanks
  • Mix ratio of 1:1:10 to 1:1:20 (Part A:Part B:Water)
  • Mix ratio can easily be changed by adjusting dial gauges
Water requirements10-100 psi (0.69-6.9 bar) Backflow prevention is required – consult local plumbing ordinances for more information.
Liquid temperature range40-100˚F (4.4-37˚C)
Chemical compatibilityChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Chemical pickup typeDraws from concentrated products
Dilution ratio range (water:chemical)*1:1:10 to 1:1:20 (Part A:Part B:Water)
Number of products unit can draw from (and whether it draws simultaneously or one at a time)Two products, simultaneously
Suction line length/diameter10 ft. (3 m) clear tubing with 3/8 in. (9.5 mm) outside diameter
Discharge hose diameter/length10 ft. (3 m) hose, with 3/4 in. (19 mm) inside diameter
Discharge wand/tip type10 in. (50.8 cm) poly wand
Output volumeVaries based on local water pressure
Flow rate*Varies based on local water pressure

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What's in the box?

  • Control box assembly
  • Discharge hose
  • Wall mount bracket for wand assembly
  • User manual

Options

No options available.

Need help with sales or support?

Phone

616.656.9225