Pre-Mix Spray Unit with All-Poly Fittings

SP-WALL-AP
Share | How to Buy
  • Draws from pre-mixed solution
  • Powered by compressed air
  • Quick-change pump
  • Poly spray gun wand with fan tip
  • All-poly fluid fittings to increase chemical compatibilty
Compressed air requirements40-80 psi (3-5 bar) with 2 cfm (56.6 l/min)
Liquid temperature range40-100˚F (4.4-37˚C)
Chemical compatibilityChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Power typeCompressed air
Chemical pickup typeDraws from pre-mixed solution
Number of products unit can draw fromOne product
Suction line length/diameter8 ft. (2.4 m) hose with 3/8 in. (9.5 mm) inside diameter
Discharge hose diameter/length50 ft. (9 m) hose, with 3/8 in. (9.5 mm) inside diameter
Discharge wand/tip typePolypropylene trigger handle with 25˚ fan tip
Output distance10-12 ft. (3.0-3.7 m)
Output volume2 gal/min (7.6 l/min)
Flow rate*2 gal/min (7.6 l/min)
Pump sealsSantoprene, Viton, or Kalrez
Fluid fittings typeAll-Poly

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What's in the box?

  • Control box assembly
  • Discharge hose and wand
  • Mounting hardware
  • Stainless steel hose rack
  • User manual

Options

 Pump Seal Material 
SP-WALLSantoprene (standard)-AP
Viton (V)
Kalrez (K)

Add bold option codes to item number as shown.  For standard options, no option code is needed. Examples:

  • SP-WALL-AP (standard unit with Santoprene pump seals)
  • SP-WALLV-AP (unit with Viton pump seals) 

Pump Seal Material Compatibility

Need help with sales or support?

Phone

616.656.9225