The Wall Mounted Fogging Unit for Dumpsters is an electric, pre-mix fog system designed for consistent, automated coverage. It supports up to four nozzles per control box and features a repeat cycle timer with adjustable tips for precise fog direction.
Wall Mounted Fogging Unit for Dumpsters
Wall Mounted Fogging unit for Dumpsters - Operation Manual
electricity
draws from pre-mixed solution
one product
4 ft. (1.22 m) clear hose with 1/4 in. (6.4 mm) inside diameter
3-5 ft. (0.9-1.5 m)
2.71 oz/min (0.08 l/min) per nozzle
2.71 oz/min (0.08 l/min) per nozzle
Santoprene and Viton
repeat cycle
very fine
hollow cone spray tip
one control box can only support four nozzles maximum and minimum
25 ft. (7.62 m)
designed for use with 1/4 in. (6.4 mm) outside diameter tubing between control box and nozzle(s)
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings
40-100°F (4.4-37°C)
120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
120 VAC
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.