• Get A Quote

15 Gallon Concentrate Foam Unit for 2-Part Products

#FI-CN-15N-2P

Features

  • Draws from two concentrated products simultaneously
  • Ideal for 2-part products that need to be mixed on the fly
  • Dilutes at ratios of 8:1 to 150:1 (water:chemical) for each product
  • Powered by compressed air
  • Holds two of our chemical jugs >> or other chemical containers
  • Onboard water tank – 15 gallon (56.8 liter) capacity
  • Hinged back plate provides tool-free access to components
  • Quick-change pump
  • Hinged lid
  • Color coding options:
    • Lid – 7 colors (BK, BL, GN, YL, RD, PL, OR)
    • Discharge hose – 4 colors (BL, GN, YL, RD)
  • Anti-kink hose protection
  • Natural color tank for easy visibility of water levels
  • Integrated hose wraps
  • Front-facing drain
  • In-line strainer to protect pump from debris

Datasheet

15 Gallon Concentrate Foam Unit for 2-Part Products

User Manual

15 Gallon Concentrate Foam Unit for 2-Part Products

POWER TYPE

Compressed air

CHEMICAL PICKUP TYPE

Draws from concentrated product

DILUTION RATIO RANGE*

8:1 to 150:1 for each product
Note: Dilution rate can be set independently for each product

NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME)

Two products, simultaneously

SUCTION LINE LENGTH/DIAMETER

Two suction lines, each 8 ft. (2.4 m) of clear hose with 1/4 in. (6.4 mm) inside diameter

CAPACITY

15 gallons (56.78 liters) of water; Up to 10 gallons (37.85 liters) of concentrate

DISCHARGE HOSE DIAMETER/LENGTH

30 ft. (9 m) hose, with 3/4 in. (19 mm) inside diameter

DISCHARGE WAND/TIP TYPE

7 in. (17.8 cm) stainless steel wand with zero tip and ball valve

OUTPUT DISTANCE

25-30 ft. (7-9 m)

OUTPUT VOLUME

20-45 gal/min (75-170 l/min)

FLOW RATE*

2-2.25 gal/min (7.6-8.5 l/min)

PUMP SEALS

Santoprene, Viton, or Kalrez

WHEEL TYPE

Two 10 inch non-marking wheels
Two 5 inch casters with lock

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

COMPRESSED AIR

40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)

LIQUID TEMPERATURE RANGE

40-100˚F (4.4-37˚C)

CHEMICAL COMPATIBILITY

Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

PUMP SEAL MATERIAL
FI-CN-15N Santroprene (standard) -2P
Viton (V)
Kalrez (K)

 

Add option codes to item number as shown. For standard options, no option code is needed. Examples:

  • FI-CN-15N-2P (standard unit with Santoprene pump seals)
  • FI-CN-15NV-2P (unit with Viton pump seals)

Other available options:

  • Fan tip
  • Color coding – lid +/or discharge hose
  • Water separator
  • Air hose

Also available in a version for single products >>
Do you use Sterilex chemical? Try our EZBlend Foam Unit >>

  • Complete foam unit with discharge hose and wand
  • Two metering tip kits for foam injectors
  • User manual
  • NOTE: Chemical jugs not included

FAQs

Which pump seal material should I choose?

Pump Seal Material Compatibility

Choose a pump seal material that is compatible with the chemicals you will use. Chemical incompatibility can cause accelerated wear and equipment failure that is not covered by warranty, so it’s important to do your research.

  • Consult the safety data sheet (SDS) for your chemical to learn about the ingredients.
  • Use a chemical compatibility database (like this one: https://www.coleparmer.com/Chemical-Resistance) to look up the ingredients and find material compatibility info.
  • Note that the concentration of chemicals makes a big difference in compatibility. Think about whether the chemical you use will be in a pre-diluted or concentrated form when it is used in the equipment.
  • If you need help, ask your chemical manufacturer. Or, send your SDS to techsupport@foamit.com and we can help.

Accessories

Support Videos

How to change a pump - with quick-change pump bracket

How to adjust the wet/dry foam needle valve

Cómo ajustar la válvula de la aguja de la espuma húmeda o seca

How to replace a check valve

How to replace a hose or wand

Wondering How to Buy?

We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.

Improvce Your Experience

You’re using a web browser we don’t support. Try one of these options to have a better experience.