50 Gallon Spray Unit

SP-50N
Share | How to Buy

Resources

Datasheet

(pdf, 2 MB)
  • Draws from pre-mixed solution
  • Powered by compressed air
  • Hinged back plate provides tool-free access to components
  • Quick-change pump
  • Natural color tank for easy visibility of product levels
  • Hinged lid
  • Color coding options:
    • Lid – 7 colors (BK, BL, GN, YL, RD, PL, OR)
    • Discharge hose – 4 colors (BL, GN, YL, RD)
  • Integrated hose wraps
  • Front-facing drain
  • In-line strainer to protect pump from debris
Compressed air requirements40-80 psi (3-5 bar) with 2 cfm (56.6 l/min)
Liquid temperature range40-100˚F (4.4-37˚C)
Chemical compatibilityChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Power typeCompressed air
Chemical pickup typeDraws from pre-mixed solution
Number of products unit can draw fromOne product
Suction line length/diameter3.5 ft. (1 m) hose with 3/8 in. (9.5 mm) inside diameter
Capacity50 gallons (189.3 liters)
Discharge line length/diameter50 ft. (15.2 m) hose, with 3/8 in. (9.5 mm) inside diameter
Discharge wand/tip typePolypropylene trigger handle with 25˚ stainless steel fan tip
Output distance10-12 ft. (3.0-3.7 m)
Output volume2 gal/min (7.6 l/min)
Flow rate*2 gal/min (7.6 l/min)
Pump sealsSantoprene, Viton, or Kalrez
Product height43 in. (109.2 cm)
Run time from full tank**Approximately 25 min.
Wheel typeTwo 10 in. (25.4 cm) non-marking wheels, two 5 in. (12.7 cm) locking caster

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

**Area covered and run time may vary based on humidity, air flow, and product used.

What's in the box?

  • Complete spray unit with discharge hose and wand
  • User manual

Options

 Pump Seal Material
SP-50NSantoprene (standard)
Viton (V)
Kalrez (K)

Add bold option codes to item number as shown. For standard options, no option code is needed. Examples:

  • SP-50N (standard unit with Santoprene pump seals)
  • SP-50NV (unit with Viton pump seals)

Other available options:

  • Color coding – lid +/or discharge hose
Need help with sales or support?

Phone

616.656.9225