Equipment to help you combat COVID-19 >>

EZBlend Foam Unit

Share | How to Buy
  • Designed specifically for use with Sterilex products – part of the Sterilex EZBlend System >>
  • Draws from concentrated Sterilex products and dilutes on the fly to prevent waste
  • No need to pre-mix solution – only activate what you use, as you use it
  • Pre-set to dilute Sterilex products at labeled rate of 1:1:10 to 1:1:8 – no setup required
  • Includes two 5 gallon chemical jugs with quick-connect suction fittings
  • Save time with fewer chemical refills – two 5 gallon jugs of concentrate will make 45-50 gallons (170-189 liters) of solution. Just refill the water tank and keep foaming
  • User-friendly color coding on jugs and unit corresponds to Sterilex solution 1 and 2
  • Foam wand with fan tip for efficient surface coverage – ideal for environmental cleaning and disinfecting food contact surfaces
  • Quick connect wand can be easily interchanged with optional FOAM-iT attachments for drain foaming >>
  • Onboard water tank – 15 gallon (56.8 liter) capacity
  • Powered by compressed air
  • Viton pump seals for compatibility with Sterilex
  • Hinged back plate provides tool-free access to components
  • Quick-change pump
  • Hinged lid, available in 5 colors
  • Anti-kink hose protection
  • Translucent tank and jugs allow visibility of fill levels
  • Integrated hose wraps
  • Front-facing drain
  • In-line strainer to protect pump from debris
  • Designed for use with EZBlend Chemical Transfer Unit >>
Compressed air requirements40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
Liquid temperature range40-100˚F (4.4-37˚C)
Chemical compatibilityThis unit is specifically configured for use with Sterilex liquid products.
Power typeCompressed air
Chemical pickup typeDraws from concentrated product
Dilution ratio range (Chemical A : Chemical B : Water)*12.8-16 fl. oz. : 12.8-16 fl. oz. : 1 gallon
(378.5-473.2 ml : 378.5-473.2 ml : 3.78 liters)
Number of products unit can draw fromTwo products, simultaneously
Suction line length/diameterTwo transparent suction lines, one blue and one green, each 4 ft. (1.2 m) long with 1/4 in. (6.4 mm) inside diameter; with quick disconnect fittings for chemical jugs
Capacity15 gallons (56.78 liters) of water; Up to 10 gallons (37.85 liters) of concentrate
Discharge line length/diameter30 ft. (9 m) hose, with 3/4 in. (19 mm) inside diameter
Discharge wand/tip type12 in. (30.48 cm) stainless steel wand and ball valve with 65˚ fan tip; includes stainless quick connects
Output distance10-12 ft. (3-4.6 m)
Output volume15-20 gal/min (56.8-75.7 l/min)
Flow rate*2 gal/min (7.6 l/min)
Pump sealsViton
Wheel typeTwo 10 inch non-marking wheels, two 5 inch casters with lock

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What's in the box?

  • Complete foam unit with discharge hose and wand
  • (2) 5 gallon chemical jugs with caps and suction fittings
  • User manual


No options available.

Need help with sales or support?


616.656.9225 or 800.567.5420