- QUICK LINKS:
- Get A Quote
features
- transfer product at up to 3.5 gal/min (13.2 l/min)
- available with Santoprene, Viton, or Kalrez seals
- operate unit by using manual air button, or timer and solenoid valve
- includes suction and discharge hoses
Datasheet
Single Product Transfer Units
User Manual
Single Product Transfer Units
Questions?
- power type
WITH TIMER AND SOLENOID VALVE: compressed air, electricity
WITH MANUAL AIR BUTTON: compressed air
- number of products unit can draw from
one product
- suction line length/diameter
8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter
- discharge hose length/diameter
8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter
- discharge wand/tip type
none
- flow rate*
3.5 gal/min (13.2 l/min)
- pump seals
Santoprene, Viton, or Kalrez
- timer operation type
WITH TIMER AND SOLENOID VALVE: single shot
WITH MANUAL AIR BUTTON: none
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
- compressed air requirements
air regulator (R25) factory set at 50 psi (3.4 bar). Operating range is 40 to 80 psi (3 to 5 bar) with 2 CFM (56.6 l/min)
- liquid temperature range
40-100˚F (4.4-37˚C)
- electrical requirements
WITH TIMER AND SOLENOID VALVE: 120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
WITH MANUAL AIR BUTTON: none
- operating voltage
WITH TIMER AND SOLENOID VALVE: 120 VAC
WITH MANUAL AIR BUTTON: none
- CHEMICAL COMPATIBILITY
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product.
- complete unit with discharge hose and suction line
- mounting hardware for control box
- user manual
Accessories
FAQs
Which pump seal material should I choose?
Pump Seal Material Compatibility
Choose a pump seal material that is compatible with the chemicals you will use. Chemical incompatibility can cause accelerated wear and equipment failure that is not covered by warranty, so it’s important to do your research.
- Consult the safety data sheet (SDS) for your chemical to learn about the ingredients.
- Use a chemical compatibility database (like this one: https://www.coleparmer.com/Chemical-Resistance) to look up the ingredients and find material compatibility info.
- Note that the concentration of chemicals makes a big difference in compatibility. Think about whether the chemical you use will be in a pre-diluted or concentrated form when it is used in the equipment.
- If you need help, ask your chemical manufacturer. Or, send your SDS to techsupport@foamit.com and we can help.
How to Buy?
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.